Humidi$aver Patent # 9,459,016
Saving The Planet and Serving Families
The Science Behind Humidi$aver & Patent # 9,459,016
Humidi$saver uses your current furnace and humidifier. It hangs underneath the humidifier and collects the wasted water. Click herefor high efficiency furnace . Click herefor older style furnace. It plugs into the wall, and only needs a connection to the 24 VAC power coming from your furnace or the humidifier. When the furnace comes on and the humidifier is active, the pump will push the collected water back up to the inlet of the humidifier. Included is a UV light to kill any bacteria that could form. A relay controls the entire process. Nothing changes except your water bills start going down.
Two electrical connections:
1. Plug into wall socket.
2. Splice into 24 VAC from either furnace or existing humidifier.
Three plumbing connections:
1. Disconnect drain line from existing humidifier.
2. Turn off city water, then disconnect city water line from existing humidifier.
3. Connect city water line to Humidi$aver input.
4. Connect Humidi$aver pump output to existing humidifier water input.
5. Connect existing humdifier drain to Humidi$aver drain input.
6. Plumb the Humidi$aver overflow outlet into the sewer or sump line disconnected in step #1.
7. Turn city water back on.
8. Done